Business Areas

ICT Infrastructure

We provide optimal solutions for building information and communication networks for a wide range of clients, including public institutions, local governments, and data centers.

  • Small rectifier
  • Medium to large rectifiers
  • Small UPS
  • Medium to large UPS
  • Distribution board
sm_img01

Power Supply Unit

GPE48 Series
48V30A~150A

  • Hot-swappable module design for easy expansion and maintenance
  • Highly reliable, high-efficiency rectifier system for stable DC power supply
  • Over-discharge protection circuit to extend battery lifespan
  • Remote monitoring via SNMP, CAN, or RS485
  • 30A, 50A, and 75A module configurations scalable up to 150A
sm_img02

Power Supply Unit

Outdoor rectifier

  • IP55 or higher dust and water protection rating
  • Highly reliable, high-efficiency rectifier system for stable DC power supply
  • Over-discharge protection circuit designed to extend battery lifespan
  • Remote monitoring via SNMP, CAN, or RS485
  • Over 8,500 PS-LTE (Public Safety LTE) base stations operated for the Ministry of the Interior and Safety national disaster and safety communication network
sm_img02
mbig_img01

Power Supply Unit

ER48 Series
48V50A~1200A

  • Hot-swappable module design for easy expansion and maintenance
  • Highly reliable, high-efficiency rectifier system for stable DC power supply
  • Over-discharge protection circuit to extend battery lifespan
  • Remote monitoring via SNMP
  • 50A module configuration scalable up to 1200A for high-capacity systems
sm_ups_img01

Power Supply Unit

Daker DK Plus

1 - 10kVA

  • VFI-111 online double conversion
  • User-friendly display
  • Extended backup time with additional battery cabinet
  • Smart battery management
  • Automatic and manual bypass (optional)
  • Easy battery replacement
sm_ups_img02

Power Supply Unit

Keor LP

1 - 3kVA

  • Conventional single-phase UPS available in three versions depending on power supply
  • Rated capacity: 1–3 kVA
  • VFI-SS-111 online double conversion
  • RS232 communication port
  • LAN / SNMP connectivity available
  • Extended backup time with additional battery cabinet
  • Compact design requiring minimal installation space
sm_ups_img02
sm_ups_img03

Power Supply Unit

Keor SPE RT

1,000 - 3,000VA

  • Single-phase UPS: line-interactive
  • Rotatable LCD display
  • Backup expansion capability
  • Full connectivity (USB/RS232, SNMP, EPO/ROO)
  • Built-in two dry contacts (power failure, low battery)
  • Hot-swappable battery replacement
sm_ups_img04

Power Supply Unit

Keor PDU

800VA

  • Low power consumption
  • Cost-effective solution
  • Sockets with full protection features
  • Front-access installation and maintenance
  • Low-noise operation
  • Compact installation footprint
  • Lightweight design
  • Easy wiring and installation
sm_ups_img04
sm_ups_img05

Power Supply Unit

Keor Multiplug

600VA / 800VA

  • Backup time: 10 minutes
  • Protection against discharge, overcharge, short circuit, and overheating
  • Combined power button / LED indicators
  • USB charging port
  • Automatic restart
  • 6 surge-protected outlets + 2 standard outlets
  • USB communication port
  • Telephone / modem / fax protection
  • User-friendly status signals and indicators
  • Easy replacement of internal battery
sm_ups_img06

Power Supply Unit

Niky S

1000VA - 3000VA

  • Pure sine wave output
  • VI line-interactive topology
  • Boost and buck AVR (automatic voltage regulator)
  • Dedicated microprocessor-based control
  • Easy battery replacement
  • RS232 communication port
  • LAN / SNMP connectivity
  • LCD display
sm_ups_img06
sm_ups_img07

Power Supply Unit

Keor SP

600 - 2000VA

  • VI line-interactive topology
  • Boost and buck AVR (automatic voltage regulator)
  • Dedicated microprocessor-based control
  • Easy battery replacement
  • Adjustable output power
  • Overload and short-circuit protection
  • Cold start function
mL_ups_img01

Power Supply Unit

Keor Compact

10-15-20 kVA

  • Online double conversion
  • Input power factor correction (PFC) (input PF > 0.99)
  • Cold start capability
  • Built-in backfeed protection
  • SNMP management support
  • Parallel operation of up to 6 units
  • Built-in batteries for standard autonomy
  • RS232, GenSet, dry contact
mL_ups_img02

Power Supply Unit

Keor XPE

250kVA or 300kVA

  • Redundant configuration
  • Hot service capability
  • Flexible cabinet layout
  • 3-level IGBT online double-conversion inverter
  • Top/bottom cable and busbar connection
  • Centralized or distributed battery configuration
  • Lithium battery compatible
  • Up to 96.4% VFI efficiency
  • Up to 99% efficiency
  • 2N synchronization
mL_ups_img02
mL_ups_img03

Power Supply Unit

Keor HP

60-800kVA

  • Rectifier and inverter using IGBT devices
  • Digital signal processor (DSP)
  • High input/output power factor (PFC)
  • Temperature-compensated battery charging
  • Isolation transformer in the inverter section
  • Low input and output total harmonic distortion (THD)
  • Compatible with generator (GenSet) operation
  • Parallel operation capability (up to 6 units)
  • Central bypass for parallel systems (optional)
mL_ups_img04

Power Supply Unit

Keor HPE

60 - 600kVA

  • Rectifier and inverter with IGBT technology
  • Digital signal processor (DSP)
  • High input and output power factor (PFC)
  • Temperature-compensated battery charging
  • Isolation transformer in the inverter section
  • Low input and output total harmonic distortion (THD)
  • Compatible with generator (GenSet) operation
  • Parallel operation capability (up to 6 units)
  • Central bypass for parallel systems (optional)
mL_ups_img04
mL_ups_img05

Power Supply Unit

Keor T EVO

10 - 60kVA

  • 3-level switching technology
  • Rectifier and inverter with IGBT technology
  • Digital signal processor (DSP)
  • TFT touch panel
  • High input power factor (PFC)
  • Output power factor of 1.0 (PF=1)
  • Low input and output total harmonic distortion (THD)
  • Parallel operation capability (up to 4 units)
mL_ups_img06

Power Supply Unit

HPi 33 EVO

10 - 40kVA

  • Compact installation footprint
  • Parallel configuration of up to 4 units
  • Enhanced battery management
  • Temperature-compensated battery charger
  • Selectable and adjustable battery charging current
mL_ups_img06
mL_ups_img07

Power Supply Unit

Keor MP

60 - 200kVA

  • Modular-based architecture
  • Wide communication capabilities
  • Intuitive 7-inch multi-color touchscreen
  • Real-time status indication via LED
  • Real-time waveform monitoring
mL_ups_img08

Power Supply Unit

Keor MOD

125kW - 250kW

  • Available in two cabinet configurations (up to 125 kW and up to 250 kW)
  • Internal backup capacity up to 125 kW
  • UPS system capacity up to 600 kW
  • Conversion efficiency up to 96.8% (power module efficiency), up to 2× improvement
  • Up to 99% efficiency in ECO mode
  • Output power factor = 1
  • Modular redundancy with N+1 configuration
mL_ups_img08
mL_ups_img09

Power Supply Unit

Trimod HE

10 - 80kW

  • VFI-SS-111 online double conversion
  • Up to 96% high efficiency
  • Power factor of 1
  • Excellent flexibility, scalability, and redundancy (input/output 3-1 configuration supported)
  • Easy and fast maintenance
  • Self-diagnostics, monitoring, data history, and parameter settings via display
  • New cabinet design for backup time and capacity expansion, and system optimization
spread_img01

Power Supply Unit

PDR
(Power Distribution Rack)

It receives a -48V DC input power supply and distributes DC power to each distribution circuit through a main distribution unit using a redundant dual power supply system.

Dimension : W600 × D600 × H2150 (standard)
Main : 1200A
Sub Circuits : 50A ~ 150A
Distribution Channels : 30CH (standard)

spread_img02

Power Supply Unit

PDP
(Power Distribution Panel)

A Rack Mount Type designed for easy installation and operation, it receives -48V DC input power and distributes DC power to each distribution circuit using a redundant dual power supply system.

Dimension : : W483 × D380 × H88 (2U)
Main : 100A
Sub Circuits : 30A ~ 50A
Distribution Channels : 4 X 2CH (Redundant)

spread_img02
spread_img03

Power Supply Unit

A Rack Mount Type designed for easy installation and operation, it receives -48V DC input power and supplies DC power to each distribution circuit.

Dimension : : W483 × D380 × H44 (1U)
Main : 100A
Sub Circuits : 10A
Distribution Channels : 12CH

spread_img04

Power Supply Unit

A high-capacity Rack Mount Type PDP, featuring a compact 1U size, stably provides distribution capability for up to 16 channels.

Dimension : : W483 × D420 × H44 (1U)
Main : 250A
Sub Circuits : 30A
Distribution Channels : 16CH

spread_img04